1. To replace a burned out taillight or stoplight, remove the two screws holding the taillight cover to gain access to the bulb.  Use an 1154 6 volt bulb.
 
 

HORN SERVICE 1. Refer to Figure 15 for horn service.  Limited adjustment of horn tone is possible by loosening the large lock nut found in the center of the horn back.  With the lock nut loose, turn the small screw in the center of the nut in either direction until the tone is loudest. 2. If the tone cannot be made satisfactory, and an original part isn't available, a Hodaka horn is an excellent replacement

.